• swimart pools and spas
    Home Reno

    Pool and Spa Mainenance- how to choose the right service

    Pool and Spa Maintenance

    pool and spa maintenance

    Swimming pools and spas require a minimum level of chlorine and cyanuric acid in order to stay clean and clear. While CYA is not necessary if you use a covered spa, it can be used as a shock treatment and source of chlorine. Overuse of this chemical can cause a buildup of CYA and reduce chlorine efficiency. Depending on your circumstances, you may want to reduce the amount of chlorine in the water or replace it completely. Borates, phosphates, and iron are also factors to consider. Experts in this field in SE Queensland are Waterline Pool Care operating in Noosa.

    Cleaning the pool filter

    Keeping your filter clean is an important part of pool and spa care. A dirty filter will make the entire assembly work harder than it needs to, reducing its efficiency and causing algae blooms. You can purchase a cleaning solution at your local pool supply store, or make your own with chlorine and water. Just mix one part pool chlorinator to six parts water and use a bucket with a tight-fitting lid. Pour the cleaning solution into the bucket and pour it into the filter. This solution will kill any microorganisms trapped in the filter material and other organics.

    When you’re cleaning the filter, look for high pressure in the water. This is an indicator that it’s time to clean the filter. If you’re using a cartridge filter, you can backwash the filter by removing the cartridge. If your filter uses sand, you can backwash the filter by reversing the flow of water. The water will flow through the filtering material and back into the pool or spa.

    A good air compressor can be handy when cleaning the cartridge filter. It can remove dirt that otherwise won’t be removed. Using an air compressor can also give your spray hose a head start. This will require less water to complete the cleaning. You can also clean the filter using a gentle brush. If you’re using a manual, you can find it in your owner’s manual.

    Checking the water level in the pool or spa

    One way to maintain a clean swimming pool is by checking the water level regularly. While most people don’t think about this aspect, it is essential. Too much calcium can cause scale buildup on pool equipment and make water cloudy. You should try to keep calcium levels between 200 and 400 parts per million (ppm).

    It’s not uncommon for pools and spas to be out of level from time to time. A small drop in the water level is usually not a cause for alarm, but a large drop can be a sign of an underlying problem. If you notice that the level has dropped by more than five inches, it’s likely that you have a faulty check valve. If the problem persists, you may need to replace it.

    If your pH level is too low or too high, you may want to consider using a pH Up or pH Down product. These products are available from the manufacturer of your spa or pool, or from the dealer who sold it to you. The pH level of water is a critical component of a healthy swimming pool. High levels of either one will lead to problems with algae growth and bacteria. When combined chlorine levels are more than 0.4 ppm, you should shock your pool. During this time, you should also consider the levels of dissolved solids and pH.

    Another important factor to consider when examining pH levels in your swimming pool is total alkalinity. Total alkalinity (TA) is a measurement of the total amount of alkaline substances in the water. Generally, pH levels should be between ninety and 120 ppm. The TA level can fluctuate, which can result in a dip in pH levels. Moreover, too low TA can lead to water that is murky and causes swimmers’ eyes to burn.

    Checking the circulation system

    Before you do anything else, check your pool’s circulation system. If it is not working, you should check the control panel for an error code. It’s most likely the circulation pump is dead, and the error code is either FLO or OH. Make sure that the GFCI test button is not tripped and that all valves are open. Inspect the circ pump’s plumbing for kinks. If it still doesn’t work, try replacing it with a new cartridge filter.

    Another part of your pool and spa maintenance routine is to clean the pump. A pump circulates water through the system to clean it and remove impurities. The pump works by drawing water from the pool and passing it through the skimmer baskets and pump impeller. A filter filters out any debris that does get through the pump. The water is then returned to the pool, and this cycle repeats itself to keep the water clean.

    The circulation system is crucial to the functioning of many pieces of pool equipment. A heat pump, for example, depends on proper circulation flow in order to keep the water comfortable. If the circulation flow is not sufficient, it may render the heat pump useless. So, it’s important to check the flow rate of your pool and spa every few months to keep it in top shape. When in doubt, check the circulation pump for any leaks.

    Cleaning the hot tub

    During pool and spa maintenance, you should regularly clean your hot tub. Ideally, you should clean it three times a week at the same time as you clean other parts of the pool. Chemicals are important for keeping the water clear and bacteria-free, and your hot tub’s pH should be at a balanced level. You should also remove debris that may contaminate the water and throw off the chemical balance.

    A spa cover should be tightened tightly around the spa to prevent fluctuating temperatures. To test the temperature of the water, remove the cover and use a waterproof thermometer to check the water temperature. If the water temperature changes drastically, a problem may have developed in the system. In addition to regular cleaning, hot tub covers should be checked and repaired if necessary. Clean them regularly to save time and money. To clean the cover properly, follow the Leslie’s Hot Tub Maintenance Checklist.

    You can clean the filter by rinsing it with water and using a garden hose to rinse away any dirt or debris from the pleats. Chemical cleaners are also an option to use, but they are often thought to be more effective. If you don’t want to use chemicals, simply use white vinegar. Alternatively, you can use a commercial hot tub filter cleaner that is designed for this type of filtration.

    Winterizing your pool or spa

    Before you close the pool or spa for the winter, you should perform some basic winterizing tasks. First, you should test the water to see if the pH and alkalinity are within the right ranges. Your alkalinity should be 80-120 ppm and the calcium hardness should be between 180 and 220 ppm. If you find that your water has a pH outside of those ranges, you can add shock or algaecide to it.

    Before you start winterizing your pool or spa, you must ensure the piping and equipment are properly winterized. In milder climates, you can simply cover the water and run the filtration system for two hours a day. In regions where winter temperatures fall below freezing, however, passive winterizing is the best option. It involves partially draining and covering the pool. Afterward, cover the pool with a cover.

    The following steps are necessary for winterizing a pool or spa. These steps are not easy, and you should hire a professional to handle this job. A professional will have the right equipment to handle this process for you, including the pool and spa filter. These professionals can also provide services like closing the pool for the winter. The pool maintenance professional will also ensure that all equipment is properly winterized and maintained for the winter. So, call a professional now for more information and get started!

    Using a reliable tester

    Whether you’re looking for a simple test kit or a sophisticated test system, using a reliable tester for pool and spa maintenance is important. You don’t want to end up with a subpar test because you were unsure of what the readings meant or because you were worried you had missed something. A reliable tester will give you accurate results and help you catch problems before they begin, just as a good pool care company would that comes out to service your pool.

    The water in your spa may have more metals in it than you realized. Often, these metals are present because of low pH levels, or even well water. While the pH level in your pool is important, if the metals in your spa are too high, you can try to balance the pH level with a hose filter to prevent the buildup of iron. If you’re concerned about the pH level of your spa’s water, a simple test strip will help you determine if you’re running into this problem.

    A reliable tester can also determine whether it’s time to add more or less chemicals to your spa’s water. Generally, pH and TA are similar, and should be checked daily, but a reliable tester can help you identify what chemicals you need and when. You can choose between electronic testers, color comparators, or test strips. Make sure to use a tester that you’re comfortable with and that matches the color of your water. Typical pH levels for pools and spas include free chlorine, total chloride, calcium hardness, and other chemicals.

    Get a regular service for your pool and spa with Swimart

  • Uncategorized

    Pest Control in Queensland – What You Need to Know About Termites, Fleas, and Mosquitoes

    about pest control in Queensland

    Termites and fleas are among the most damaging pests in Queensland. While they are not the only annoyance, they also cause illness in farm animals. Luckily, pest control in Queensland has come a long way! Keep reading to learn more about the different types of pest control services in your area. And don’t forget about the important pesticides, too! Listed below are the top five pests that you need to be aware of in Queensland.

    Termites are the most destructive pests in Queensland

    There are a variety of termites in Queensland. Two of the most common species are the brown flying termite and the king termite. Both species are extremely destructive and may lead to serious property damage. King termites can cause considerable damage to homes and buildings, particularly those made from wood. King termites are especially destructive because they can eat through bitumen and rubber tyres. They will also eat wood from skirting boards and other edifices.

    While the termites are not the only ones causing damage to properties in Queensland, they are a particularly serious pest. One in every five homes in Australia is infested by termites. In fact, according to industry surveys, one-third of all unprotected properties is a victim of termite attacks. Recent changes to building construction materials and designs have increased the risk of a hidden termite infestation. These creatures can destroy wall and roofing timbers in as little as three months. Termites are more damaging than floods, storms, and fires combined.

    While subterranean termites can be controlled by removing moisture sources, drywood termites do not have this ability. Unlike subterranean termites, drywood termites can enter a building without soil contact and do not leave visible tracks. Despite decades of fumigation treatment, the Queensland government has discontinued its prevention and control program. The only way to keep the termites in check is to use a community-based approach that targets the problem at its source.

    Fleas and ticks are common in Queensland

    Ticks and fleas are small insects that can be found on people and animals. They are members of the arachnid family and can be extremely dangerous. The most common types of ticks are paralysis ticks, brown dog ticks, and bush-ticks. While they can cause illness and even death, they are not always deadly. Here are a few tips to keep your pets tick-free and healthy:

    Before moving a dog to Queensland, it’s important to assess its health and wellbeing. If your dog has been previously treated for fleas or ticks, you can prevent further infection with a prevention program. You can also treat bedding to prevent reinfection from the environment. You can also check your dog’s fur regularly for fleas and ticks and apply preventative products. If you suspect that your dog has E. canis, contact Biosecurity Queensland on 13 25 23 or the Emergency Animal Disease Watch Hotline on 1800 675 888.

    Although it’s important to take precautions against ticks and fleas, a general rule of thumb is to keep pets indoors. If you must spend time outdoors, use tick prevention products. If you must be indoors, wear long-sleeved clothing. If you do venture outside, make sure to cover up, and take your pets with you. Fleas are often infested areas like bushes and grasslands.

    Termites are a major cause of disease for farm animals

    The most damaging pest to Australian farm animals is the termite, and this pest is responsible for a range of diseases in both farm animals and humans. Buildings, crops, and plantations are all susceptible to damage from termites. The giant northern termite, Mastotermes darwiniensis, is considered invasive and has a similar appearance to cockroaches. These insects emerge from the soil as a nymph and moult to form workers, soldiers, and alates.

    Numbats are strictly diurnal animals that don’t have proper teeth. Their “pegs” are blunt, and they cannot chew food. As small mammals, Numbats cannot break into termite mounds. They rely on the termites that are within reach. In order to do so, they live in open areas near shrubs and trees. Trees are important as they protect animals from predators, but they must also allow sunlight to reach the ground, which warms it.

    Termites are a significant cause of disease in farm animals in Queensland. The pests have the ability to cause serious structural damage to buildings and crops. They live in colonies and are classified according to caste. Workers are the dominant caste, and they are the ones that are the most destructive, with the largest colonies. Termites are categorized by type: worker, soldier, reproductive, and subterranean.

    Mosquitoes thrive in sub-tropical Brisbane climate

    The sub-tropical Brisbane climate is conducive to mosquito breeding. It is estimated that more than 40 per cent of properties in the city have rainwater tanks, though the actual number may be much higher. In the 1950s, Brisbane experienced epidemics of Aedes aegypti that led to the removal of rainwater tanks. This action effectively drove disease-carrying mosquitoes out of the city, but many people still modify their tanks. Some of these people will remove the sieve from the roof and modify their downpipes.

    The climatic variability of the mosquito’s range has largely been due to human activities. Shipments of car tyres, for example, create small ponds of water, which are ideal breeding sites. The mosquito’s range is largely tied to its habitat and climate, as temperature and rainfall patterns have been shifted northwards. The retraction of its range may also be linked to a decrease in the temperature of the winters. As temperatures and rainfall patterns become milder, the mosquito may be able to establish its range further north.

    In spring, female mosquitoes emerge from their hibernation stage, where they feed on blood, then lay their eggs. These eggs will later produce the next generation of adult mosquitoes. Only a few mosquitoes survive the winter as larvae, often buried in the mud of freshwater swamps. As temperatures increase in the spring, the larvae begin feeding again and complete their immature growth. They emerge as adults and continue to reproduce.

    Bed bugs feed on warm-blooded animals and humans

    While bedbugs prefer to feed on humans, they will also infest other mammals. They are also known to feed on cats, dogs, and poultry, as well as bats and swallows. Infestations in buildings can also be caused by these insects, as they feed on these mammals. These bugs may “hitchhike” onto humans and their belongings, so exclusion of these animals from homes is essential.

    Bed bugs are small, brownish insects that feed on the blood of warm-blooded creatures, especially humans. They are active at night and hide during the day. Adult bed bugs are small, oval-shaped insects that can range in color from reddish-brown to mahogany. While they may appear to be flat and unattractive without magnification, they can survive for months without feeding. Bedbugs are able to hide in crevices and protected areas.

    Bed bugs feed on human blood and the blood of other mammals. Some species prefer the blood of specific mammals, while others will feed on any warm-blooded animal. Although bedbugs feed on humans, three species of them are specialized for the task. These insects are called Cimex lectularius and Cimex hemipterus. Some species of bedbugs prefer human blood over the blood of other mammals, such as bats. The specific blood of a mammal is necessary for them to lay eggs. However, some species will also feed on other types of blood.

    Exempted pest management activity

    Under the Biosecurity Act 2014, a range of actions and regulations have been introduced to improve biosecurity preparedness and response. Weeds and pest animals can have significant negative impacts on the environment, economy, and community. In order to understand the changes, visit the Department of Agriculture and Fisheries’ website and read fact sheets about pest species management. In addition, contact Biosecurity Queensland by calling 132523 to obtain more information. Before engaging in any pest management activity, landholders need to understand the laws and regulations surrounding the pest species they are trying to control.

    A biosecurity matter is a species that is not normally present in Queensland but could have significant negative impacts on the state. It may include animals, weeds, pest plants, and animal diseases. If a person comes across a prohibited species, they must report it to Biosecurity Queensland and take the appropriate measures to control its spread. This is a very important step when working in an environment that depends on the protection of biodiversity.

    In order to comply with these laws, a pest management technician must adhere to subsections (1) and (2) immediately before and after the activity. The responsible person must also ensure that a suitable barricade is in place. It must prevent access to the fumigation space or the risk area for the duration of the exposure. The responsible person must also ensure that warning signs are posted properly and not removed or defaced. Finally, the responsible person must test the space for leakage and make sure that the pesticides do not escape during the fumigation process.

    Eco-friendly pest control tactics

    When it comes to eco-friendly pest control in Queensland, you’ll be glad to know that there are some very good options. The state follows several international and local by-laws, which help guide pest management practices. In addition, the state follows the U.N. Biosecurity Act of 2014. These by-laws are extremely important when it comes to protecting the environment, but they also provide explicit guidelines for safe pest control.

    Biological control is one of the most popular methods of pest control in Australia, and it is widely used throughout Asia and the Pacific. Research from the University of Queensland has shown that these methods have saved many farmers in the region. The state has also introduced new laws that require pest inspections every 12 months or more frequently for higher-risk areas. However, using a barrier system in Queensland’s climate is still the best option for protecting your property and your family.

    The citrus gall wasp is another pest to consider. While its natural host is the Australian finger lime, it can attack any type of citrus tree. Using a bait spray, eco-naturalure works by combining specific food-based attractants with a bacteria-derived insecticide called spinosad. When applied around trees, these pesticides kill the larvae, preventing them from reproducing.

    For more information visit Control Pest Management

    About The Author

    Dan Croke on LinkedIn

    the author.

    Dan Croke was a disadvantaged young man living in relative poverty in his formative years. This led Dan Croke to become a giver to others, not a taker. In a wide ranging interview Dan Croke explains that coming from a background of “living hand to mouth” in his early years, led to a lifetime of trying to build sustainable wealth for his own family and to give back to people he felt had been left behind.

    Dan Croke is now a successful property investor, helping others to achieve financial freedom through investing. This Brisbane man, Dan Croke, who grew up in Warwick, Qld, moved to Brisbane and went on to become a wealthy property investor, having so far acquired almost 200 properties, some of which are individually worth as much as $5M and $10M. He has silently and anonymously helped scores of people over the years

    You can find more at the Dan Croke website or by watching “A Current Affair” on Channel 9 from the 28th January 2021 about  the secret philanthropist: Dan Croke.

  • Uncategorized

    Carpets cleaned for the Southern Spring – here’s what to do

    Carpet cleaning is generally performed for the purpose of removing allergens, stains, and other impurities from hard-wearing carpets. Most common methods of cleaning include dry-clean, hot water extraction, and steam cleaning. However, there are many other methods that are not mentioned here.

    The most popular carpet cleaning methods involve the use of hot water. It is a fast, easy method that is ideal for use on carpets that need cleaning as soon as possible. The hot water is extracted using a hose and the dirt is washed out with water. This method also allows the area where the cleaner will be used to dry up quickly, which is often necessary if it has been raining. This method is especially effective in the case of spills that have occurred on the carpet.

    Dry-cleaning is another way to clean carpets because it uses a process that is similar to vacuuming but much more gentle. It is usually performed by a professional carpet cleaner who can use a vacuum that has suction to suck out the dirt. It takes a little bit longer than hot-water extraction but can be a lot cheaper.

    A commercial vacuum cleaner can be used to clean carpets in residential homes as well as offices. These cleaners work very well in residential settings, since they use powerful vacuum motors to suck out the dirt. They also have a sprayer that helps to remove the dirt on the carpet. These vacuums are more expensive than their household models and can sometimes require more professional service than the average home cleaner. For these reasons, it is important to choose a carpet cleaner that uses high-powered vacuum motors and that is licensed to use in your city or state.

    If you choose a commercial cleaning machine to clean your carpet, make sure to consider the features that come with it. Some machines come with attachments that allow the user to do additional tasks such as cleaning up spills. They also may have different types of filters, suction, brushes, and pads to deal with different areas of the carpet. Make sure you take these features into consideration before purchasing a particular machine. If you don’t want to buy a commercial model, you can make do-it-yourself options from home. by buying products at your local store. that you can use at home to clean stains.

    Carpet cleaning methods can vary depending on the type of stain that is on your carpet, the amount of money that you have to invest, and the area in which you need to clean. Cleaning a carpet should be fun, especially when you find the right product.

  • Uncategorized

    Toyota Car Dealerships – how to choose the one for your servicing

    Things You Should Do Before You Buy from a Toyota Dealership

    Buying a brand new car from a auto servicing center isn’t always the easiest of tasks, but it doesn’t have to be as complicated as many people think. With the right knowledge to hand before you even step into a retailer, you could even find the experience to be somewhat simple.

    There are a few things that you can do to help you find the best possible broker and get the perfect automobile for an affordable price, all before you leave home.

    How good is your credit score?

    Typically, it can be wise to check your credit score before heading to a dealership. Your score can have an impact on the interest rates available to you and because of this, having an idea of how good your credit score (and your report) is could help you to save quite a bit of cash when you buy your dream vehicle. Even when taking out finance on a car, your credit score will play a role in the decision of the broker selling to you, so this is a good factor to consider before proceeding.

    Ensure that you’re buying from the right Toyota dealership

    There are so many different car retailers out there, so how will you find the best one to buy from? In most cases, you need to start by doing a little research online. Taking a look at ones in your area is often a wise idea and from there, it can be helpful to take a look at customer reviews online. Most good dealerships will have reviews on their own site and there are plenty of review websites that can help you, too.

    Licenced dealers

    In the grand scheme of things anyone can sell a car such as a Toyota HiLux (both in person and via digital means), but you may be surprised to hear that those that have physical businesses or retail spaces are not always licensed or affiliated with brands.

    Second hand dealerships can be great for a number of reasons, but there’s no better assurance and security than that that comes from purchasing a vehicle from a reputable car sales team and a registered store.

    Arrange a test drive

    A good way to see if a car is ideal for you is to take it out for a test drive. Many Toyota car dealerships will allow you to try driving the car before you make a commitment, which can help you to get a feel for the make and model, and how the car handles on the road. Even if you’re buying from a reliable dealer, it’s generally best to take a car out for a test run to be sure that the vehicle suits your needs.

    In most cases, these can be arranged online or via phone.

  • Uncategorized

    Sewer Equipment – from SECA

    SECA – Great tools and customer service

    There are many pieces of equipment that can be utilised in sewage and plumbing, and they can all function differently to others. For example, certain tools can be used to uncover the cause of the problem, but they may not be able solve it.

    Because of this, it’s often highly important for customers to know what they need before they start buying equipment. SECA understand just how crucial it can be to have the right equipment for the task at hand and this is why they have such an excellent customer service team.

    They strive to answer any questions that buyers may have (for example, what tools should be used to unclog a drain pipe), and to help in other way that they can. It is this – along with their quality products and fair prices – that makes SECA as popular as it is.

    What kinds of equipment do SECA sell?

    There are a number of different tools that can be used for a range of plumbing tasks and fortunately, SECA offer almost anything that a plumber may need.

    From a variety of sewer jetters and cameras (both big and small) for CCTV inspection that can allow you to take a closer look at the problem, to drain snakes, operator tools and sewer jetters that can clear nearly any blockages within; there’s something for any kind of sewage or plumbing job.

    How To Use a Sewer Jetter

  • About Projects

    Everybody has something to offer, and everything can be shared online. Do you have a little spare time and the desire to make a difference? Talk with our readers about what you do.

    Follow us to become one of the original project sharers in your area.

    Feature Article:

    Advice for Tackling Your Mondays

    From Veteran Investor Jason Sugarman

    As a private equity investor, financier and a major charitable donor, Jason Sugarman starts the week with a lot on his plate. Just like for everyone else, Monday mornings can be quite trying for him. But after years of working in the investment sector, Mr. Sugarman has come up with a few “hacks” to make Mondays a tad more tolerable. Here’s his advice for everyone else who wish Mondays would just disappear off the calendar:

    Don’t Netflix on Sundays

    At least, don’t watch Netflix on Sunday evenings. Doctors warn that streaming movies or shows right before sleep time leaves people too excited to sleep. Mr. Sugarman finds Mondays are easiest to handle when he’s had a good night’s sleep on Sundays. Likewise, plan to get at least 8 hours of sleep at night on Sundays. You will be much less likely to come to work irritated, drowsy, or tired on Mondays then. To do that, scratch Netflix from Sunday nights. You can catch up later during the week, or on Saturdays. Prioritize sleep to work efficiently the following day.

    Don’t Procrastinate on Friday

    The secret to great Mondays is not leaving anything undone on Fridays, according to numerous professionals. Don’t leave the office on Friday with tons of work left to do on Monday. If you do, you will only end up with a crammed schedule on the first day of the new week. It could possibly make the rest of the week a living nightmare. Therefore, never procrastinate on Fridays. Don’t rush home leaving some “small” tasks unattended. If you do, you will definitely regret it come Monday.

    Eat Breakfast at Home on Mondays

    Doesn’t the rush hour seem a bit too rushed on Mondays? Expect everyone else too feel just as badly as you do on Mondays. Don’t be surprised if the line at the local Starbucks is longer than usual. Even people who don’t usually drink coffee want some on Mondays. You can avoid most of this by eating breakfast at home on Mondays. Plan to get up early, so you have time to eat and drink coffee without having to waste time in a line. You can arrive at the office well fed and hyped to jumpstart the workweek.

    Work Out, If You Can

    Researcher Ron Friedman published an influential article in the Harvard Business Review that shows how exercise motivates people to engage in work and also improves overall job performance.  Isn’t that exactly the thing we all want on Mondays? If you can get up early, as mentioned above, you may have some time to work out and get in the mood for working. You don’t have to work out for hours. Even 15 minutes of sweat-inducing activity is sufficient. If you have a treadmill at home, this shouldn’t be a problem.

    Above all, stay calm and composed. Don’t start Mondays in a depressed mood. Surround yourself with positive energy that doesn’t dampen your mood. Staying positive helps with staying motivated. Don’t succumb to the proverbial “Monday morning panic,” and keep calm. 

    More by Jason Sugarman

    Latest Content On Our Site

    Home Renovations with UniqueResidence : Choosing the right suburb for your property investment. (8 Oct 2019)

    Aircon repairs and maintenance – the coolest project for your home. (11 Oct 2019)

    Spill Kits – how to make your home safe from chemical hazards

    NBN Batteries – Installing NBN and setting up your NBN Batteries

    (17 Oct 2019)